The Process of Assessment Validation: Steps to Validate Assessments

The Process of Assessment Validation: Steps to Validate Assessments

Blog Article

Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.

A Look at the Two Types of Assessment Validation

The Basics of Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.

On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

Here, we will concentrate on assessment tool validation.

Steps for Conducting Assessment Tool Validation

Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.

Optimal Timing for Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated
- new training products are added by you on scope
- review your course against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Which Training Products Should You Validate?

It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.

Assessment Tool Validation: Required Resources

Learning Resources

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Validation Group

Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.

In total, your validation panel must have:

Vocational competencies and current industry skills relevant to the unit being validated

Current expertise and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or an equivalent successor

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While get more info templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.

Assessment Core Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Rules of Evidence

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Are the assessment tools based on current units of competency and modern industry practices?

Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Live Up to Your Words

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

diaper change

prepare bottles, feed infants from bottles, and clean equipment

solid foods preparation and feeding babies

respond appropriately to baby signs and cues

settle infants for sleep and prepare them

monitor and encourage physical exploration and gross motor skills suitable for the age

Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

Complete or Not Competent

Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

Possible answers include:

Required resources

Related costs

Duration of activities

Assigned functions and responsibilities

If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolation, engineering, administrative controls

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering, administration

Equipment or machinery – isolating, engineering controls, administration

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.